DC Motor Forward-Reverse Using a Relay Diagram
This post is about controlling a DC motor forward and reverse using a relay. In this post, we will use the 8-pin finder-type relay, better known as a glass-type relay. The 8-pin glass-type relay is a double-pole, double-throw relay, commonly used in circuits where an automatic “double-pole, double-throw controlling switch” is needed. In a double-pole, double-throw relay, there are 2 common contacts, 2 normally closed contacts, and 2 normally open contacts. We also have 2 magnetic coil contacts. This coil can be rated 12 DCV, 24 DCV, 110 ACV, and 220 ACV. You can choose it according to your requirements.
DC Motor Forward Reverse Using Relay (8-Pin Finder Relay)
In the diagram below, a DC motor is forward-reversed using a relay. I have shown a DC power supply, a 12-volt DC motor, and an 8-pin finder relay whose coil is 12-volt DC-operated. Also, 2 one-way switches, one of which is used to change the motor rotation. The 2nd switch is used for the ON/OFF Motor.
In the above relay. Pins 1 and 8 are common. Pin 4 is normally closed; pin 3 is normally open with pin 1. Pin 5 is normally closed, and pin 6 is normally open with pin 8. I hope this simple, easy wiring diagram helps you understand how to control DC motors with a “forward-reverse switch” Connection. If you have any questions about the post or diagram. You can ask your question in the commenting system below.
